TC-Helicon VoiceTone C1 Manual - Manual (Page 10)

FAQ
Why am I hearing distortion?
Likely the MIC GAIN knob is set too high. Ensure that the Input LED is green most of the time with only
brief and rare peaks of red.
Can I use the product on an auxiliary send/return?
Yes. You will need balanced XLR to TRS cables to do so. Ensure that the MIC GAIN knob is set to
minimum to accept the line level signal from your mixer.
Will I need a DI box to connect to a mixer?
No.
Why is the effect turning the effect on and off by itself?
This can happen when you have the MIC CONTROL knob pushed in and you are connected to a mixer
with “pseudo balanced” outputs. Unless you are using only the specific TC-Helicon mic with the Mic
Control feature, the MIC CONTROL knob should be out.