SUUNTO MOSQUITO User Manual

Page 77

Fig. 4.13. Adjustment Mode.

Fig. 4.14. Setting Altitude
Adjustment.

4.5. ALTITUDE, PERSONAL AND
UNIT ADJUSTMENT SETTINGS
[AdJ]

The current Altitude and Personal Adjustment Modes
are shown when diving as well as at the surface. If the
mode does not match the altitude or conditions (see
chapter 3.2.4.), it is imperative that the diver enters
the correct selection before diving. Use the Altitude
Adjustment to select the correct altitude mode. Use
the Personal Adjustment to add an extra level of
conservatism. In this setting mode also the desired units
can be selected (metric, m/°C or imperial, ft/°F).

NOTE: New altitude and personal adjustment
selections cannot be made until 5 minutes after a
scuba dive.

To set the new Altitude, Personal or Unit Adjustments:

1. In the Setting Mode [SET], press S ﬁ ve (5) times
to select the Altitude, Personal and Unit Adjustment
Mode (Fig. 4.13.).

2. Wait two seconds until the Adjustment Mode
activates automatically. The altitude setting starts to
blink on the display (Fig. 4.14.).