SUUNTO MOSQUITO User Manual

Page 76

4. While the alarm status [On/OFF] is selected
(blinking), press + or - to change the status. When
the alarm status is On, the depth alarm indicator
( -symbol) in the bottom right corner of the display
indicates that the alarm is on.

5. While the depth digits are selected (blinking), press
+ to increase the value or - to decrease it at intervals
of 0.5 m [1 ft]. Holding down either button starts the
scrolling of the depth value. The range of the depth
is from 3.0 to 99.5 m [10 to 300 ft]. If set to 0, the
alarm is disabled.

6. While the dive time minutes are selected (blinking),
press + or - to change the time. If the time is less than
ﬁ ve (5) minutes, the dive time alarm seconds can
also be set. This feature can be used for freediving
(Fig. 4.11.). If the selected time is over 5 minutes no
seconds are displayed (Fig. 4.12.).

7. After you have set the depth alarm, press the M
button to save the settings and to return to the Setting
Mode [SET].

Fig. 4.12. Dive Time Alarm.
Display when more than 5
minutes dive time left.