SUUNTO MOSQUITO User Manual
Page 74
72
When Oxygen percentage (O
2
%) or Oxygen partial pressure (PO
2
) are selected
(blinking) press + or - to change the setting (Fig. 4.9.).
5. After you have set the EAN settings, press the M button to save the settings
and to return to the Setting Mode [SET]
4.3.3. SET FREE MODE
To set the FREE mode:
1. In the Setting Mode, press S three (3) times to select the Dive Setting Mode
(Fig. 4.7.).
2. Wait two seconds until the Dive Setting Mode activates automatically. The
enable/disable status [On/OFF] starts to blink on the display and the selected dive
mode (AIR, EAN or FREE) is displayed (Fig. 4.8.)
While the enable/disable status [On/OFF] is selected (blinking) press + or - to
change the status.
3. Press S to change the selection in the following sequence:
->On/OFF status -> AIR/EAN/FREE mode
When the dive mode is selected (blinking) press + or - to change the mode to
FREE.
4. After you have set the FREE, press the M button to save the settings and to
return to the Setting Mode [SET].