Gas change and multiple breathing gas mixes – SUUNTO D9tx User Manual
Page 92

6.2.4. Gas change and multiple breathing gas mixes
The Suunto D9tx allows gas changes to enabled gas mixes during the dive. When the
maximum operating depth allows for a gas change, the dive computer prompts you
to change the gas. When PO
2
permits better decompression gas to be used, the dive
computer prompts it automatically if it is set as primary. Gas changes are made by
following the procedure below:
NOTE
Mix number, O
2
%, He% and PO
2
for the mixes are shown
when scrolling. If the set PO
2
limit is exceeded, it will be shown
with the PO
2
value blinking. The dive computer does not allow
you to change to a gas whose set PO
2
is exceeded. In such
a case, the mix is shown but cannot be selected. If the PO
2
is less than 0.18 bar, the dive computer gives an alarm.
93