Setting the surface time notify alarm (free mode), Setting the sample rate, 62 5.8.9. setting the sample rate – SUUNTO D9tx User Manual
Page 61
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
NOTE
With a range of 1–999 minutes, the alarm can be set to your
planned bottom time, for example.
5.8.8. Setting the surface time notify alarm (FREE mode)
You can set the Surface Time Notify Alarm to indicate the length of the surface time
before a new dive. Suunto starts counting the time automatically when you surface
(at 0.5 m/1.6 ft).
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.8.9. Setting the sample rate
The Sample Rate setting controls how often the depth, tank pressure (if enabled), and
water temperature is stored in the memory.
62