SUUNTO COBRA3 User Guide - Manual (Page 42)

NOTE
If MIX2 is set ON, settings for all mixes are stored until changed.
If MIX2 has an oxygen content of 22% or greater, settings for all
mixes are stored until changed.
5.7.4. Setting the personal/altitude adjustments
The current Altitude and Personal Adjustment settings are displayed in the startup
screen when entering the DIVE mode. If the mode does not match the altitude or
personal conditions (refer to Section 5.8.4. Diving at altitude and Section 5.8.5. Per-
sonal adjustments), it is imperative that you enter the correct selection before diving.
Use Altitude Adjustment to select the correct altitude and use Personal Adjustment to
add an extra level of conservatism.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.7.5. Setting the sample rate
The Sample Rate setting controls how often the depth, tank pressure (if enabled), and
water temperature is stored in the memory.
You can set the dive profile sample rate to 1, 10, 20, 30, or 60 seconds. The factory
default setting is 20 seconds.
42