Setting the tones, Ac water contacts – SUUNTO COBRA3 User Guide User Manual

Page 24

Text mode
Original mode

4.1.5. Setting the tones
In the Tones setting mode, you are able to activate or deactivate the tones.

ADJUST WITH UP AND

DOWN BUTTONS. ACCEPT

WITH SELECT BUTTON.

NOTE

When the tones are off, there are no audible alarms.

4.2. AC water contacts
The water and data transfer contact is located on the rear of the case. When sub-
merged, the water contact poles are connected by the conductivity of the water and
the “AC” symbol appears on the display. The AC text is shown until the water contact
deactivates.