Sure Heat SGR30M Natural Gas Conversion Kit - Manual (Page 8)

1. Remove the six (6) screws on the inside of the
grill that hold the rear infrared cover in place.
(See Fig. 30)
2. Close the grill hood slowly.
3. Grasp rear infrared cover and remove it from the
grill. (See Fig. 31)
4. Use the wrench supplied with this kit to remove
the LP orifice. (See Fig. 32)
5. NG orifice. (See Fig 19 on page 5)
6. Install the NG orifice. (See Fig 33)
7. Use the screws removed in step 1 to secure the
rear infrared cover. (See Fig. 30)
Note: At the completion of the conversion, a
leaktest should be performed on all fittings.See
Use and Care manual for leak testing procedure.
Installation is now complete.
Enjoy your grill safely.
8
Fig 31
SGR30M Natural Gas Conversion Instructions
Fig 30
Fig 32
Orifice
RACEZ00013A
19/10/2006
Conversion Kit Assembly Picture