Grill assembly – Sure Heat 2007 Amana SF27 User Manual
Page 15
Grill Assembly
15
STEP EIGHT
a. On the inside bottom of the side burner assembly
you will find the brass burner cap attached with tape.
Remove and set aside.
b. Feed the side burner gas supply hose assembly
through the grommeted hole in the side of the cart.
c. Loosen the four (4) M6-12 Hex Head Screws on the
right side of the grill.
d. Attach the right side burner shelf by inserting the
four screws on the side of the grill head into the
holes on the right shelf.
e. Tighten the screws with a screwdriver.
f. Install one self tapping screw into the bottom front
slotted hole of the shelf. This will permanently lock
the shelf in place.
8d
8c
8b
8f
close-up of steps 8f