Studiologic Numa Organ - Manual (Page 16)

NUMA Organ by Studiologic® 16
External Rotary Speaker / Update
External Rotary Speaker
Cabinet
You can operate / amplify your NUMA Organ with an external
Rotary Speaker cabinet via an 11-Pin connector.
The rotor speed as well as Start/Stop (Brake) are also
controllable with the Rotary wheel and the Sustain pedal. This is
identical to the internal Rotary Speaker simulation (page 10).
Connect the 11-pin socket on the back of the NUMA Organ with
the Rotary Speaker cabinet by using a suitable cable. You can then
use all outputs simultaneously, namely an external Rotary, the
analogue audio outputs with the internal Rotary simulation, and
the “clean” direct outs, as well as both headphone outputs of the
NUMA Organ.
For further Rotary Speaker connection/control information, please
also refer to the operation manual of the external speaker system.
Pin Function
1 Audio (Rotary)
2 Audio (Stationary)
3 Audio (Aux 1)
4 Ground
5 Control Supply
6 Control Circuit
7 Fast
8 Slow
9 Speed Adjust
10 Audio (Aux 2)
11 +29 VDC
To update the fi rmware or physical model of your NUMA Organ,
connect the mini USB jack with a computer where you installed
the computer software available for download from our website
www.studiologic-music.com.
Press and hold Upper while switching on the NUMA Organ. If the
connection to the computer is correct and the appropriate software
installed, all buttons of the NUMA Organ will blink slowly. If the
connection cannot be established, they will blink fast.
Now you can transfer data to the NUMA Organ using the computer
software. After successful data transmission restart your NUMA
Organ by switching power off and on again.
11
10
9
8
7
6
5
4
3
2
1
System Update