Fatar dynamic touch, Preset recall / store – Studiologic Numa Organ User Manual
Page 15
![background image](/manuals/712293/15/background.png)
NUMA Organ by Studiologic®
15
Operation
E
Preset recall / store
• Preset recall / store
You can also use your NUMA Organ as a master keyboard, providing
full MIDI note velocity dynamic range to other sound expanders.
Press Fatar dynamic TOUCH. The button lights up. Now the MIDI
notes will be sent with the full MIDI velocity range through the MIDI
output and USB. In this state the internal sound engine is not active
(Local off , MIDI on).
To play the internal sounds of the NUMA Organ and an external
device via MIDI or USB at the same time, press Fatar dynamic
TOUCH again. The button is now blinking (Local on / MIDI on).
By pressing Fatar dynamic TOUCH a third time, the button will
turn off . You play the internal sound of the NUMA Organ with the
keyboard and no MIDI data are sent via MIDI or USB (Local on / MIDI
off ).
After switching the NUMA Organ on, preset 12 is active by default.
Within this preset you can adjust all settings.
To recall another preset, the Preset function has to be active
(button lights up). You can then choose a preset by pushing one
of the 12 reverse coloured keys in the lowest octave. Immediately
the stored timbre will be recalled. That way you can change very
quickly between diff erent sound settings during a performance,
as long as Preset is active and lit up. Preset 12 always keeps your
last adjustments. So you could, for example, switch to preset 5 and
come back to your last changes by switching to preset 12 again.
If the Preset function is deactivated (Preset is not lit up), you are
saved from changing a preset unintentionally. The reversed keys
are then without function. You can activate and deactivate the
Preset function by pressing Preset.
To store your own settings permanently, press and hold Preset.
While pressing Preset you select one of 11 storage memories by
pressing one of the reverse coloured keys 1 to 11. After releasing
Preset your actual settings are stored at the memory position of the
pressed reverse coloured key.
All parameters except the EQ / Volume and Fatar dynamic TOUCH
settings are stored in a preset.
It is not possible to overwrite preset memory 12. It always keeps
your last changes.
Fatar dynamic TOUCH
• Fatar dynamic TOUCH