Password settings (recommended) – StarTech.com AP150WN1X1OG User Manual
Page 22
Instruction Manual
18
Save and Reload Settings
Allows you to back-up your current settings which may be reloaded at a later time. This
feature may be useful for testing new features and settings without having to worry
about returning to a stable platform.
You may also reset the Access Point’s settings to factory settings by pressing Reset. By
resetting the Access Point you will lose all previous configurations and will need to run
the Smart Setup Wizard again to reconnect to a Home Network.
In addition to the web interface, the PoE Injector has a small reset button located on
the rear side. Press and hold the reset button for 10 seconds to restore all settings to
factory default.
Password Settings (recommended)
By default, the Access Point does not require a password to log in to the web menu. If
you wish to enable a password to protect unauthorized access to the web menu and
Smart Setup Wizard, you may enter one here.