StarTech.com SV565UTPUEU - Manual (Page 7)

Instruction Manual 4
Installing the Host Unit
1. Place the Host Unit near the computer.
2. Switch off the computer and disconnect any connected devices.
3. Using the provided StarTech.com integrated KVM cable (see page 15 for alternative part
numbers), connect the end of the cable that has two (USB) or three (PS/2 + VGA) connectors
to the VGA Out connector and the USB or mouse and keyboard PS/2 connectors on the
computer as appropriate. (The PS/2 version of the cable is color-coded.) Connect the
opposite end of the cable with a single connector to the gray-coded connector marked
COMPUTER on the Host Unit of the KVM extender.
4. If you wish to have console access to the host computer, connect a USB mouse, keyboard,
and VGA monitor to the indicators marked as CONSOLE on the Host Unit.
5. Connect the UTP cable connection for Remote Unit to the NETWORK RJ-45 connector on the
Host Unit. Connect the opposite end to a terminated wall outlet (if you are using premises
cabling).
Control Direction
Cat 5 Cable
Computer B
Console
Computer A Console
1 to 2 2 to 1
Remote Unit Local Unit
(optional)