StarTech.com SV565UTPUEU - Manual (Page 17)

Instruction Manual 14
Set Maximum Video Resolution
By default the KVM switch is set to output an EDID signal with a maximum video resolu-
tion of 1024 x 768 to the host computer systems. To be able to set a higher video resolu-
tion on the host computer systems, use the following command with the 4 digit code for
the maximum video resolution you wish to set.
NOTE: Do not use the numeric keypad for entering the 4-Digit Code. Only use the num-
ber keys along the top row of the keyboard.
Left , Left , V, 4 digit code
4-Digit Code Resolution 4-Digit Code Resolution
1007 1024 x 768 1609 1600 x 900
1208 1280 x 800 1612 1600 x 1200
1210 1280 x 1024 1610 1680 x 1050
1307 1360 x 768 1910 1920 x 1080
1409 1440 x 900 1912 1920 x 1200
1410 1440 x 1050
NOTE: You may need to reboot the host computer(s) for the new settings to take affect. If
not done automatically by the host computer’s operating system, you may then need to
manually adjust the display settings to the new maximum resolution.