StarTech.com WIFI2VGA User Manual

Page 16

Instruction Manual

The PC2TV application cannot connect/find the wireless video extender.

• Double check that computer is connected to the proper wireless network. The

default SSID of the wireless video extender is “PC2TV”.

• Check that the Windows Firewall is not blocking the application. Set the

PC2TV application as an allowed program if necessary.

• If any third-party firewall or anti-virus software is installed, check that the

PC2TV application is not being blocked by either. Temporarily disable both to

confirm if this is the case.

Unable to connect to the wireless video extender AP.

Reset the AP Mode settings:
1. Turn off the wireless video extender.
2. Connect the computer to the extender with an RJ45 Ethernet cable.
3. Power on the wireless video extender.
4. Launch the PC2TV application, go into Settings and then go into the

configuration screen.

5. Click on the AP Mode tab and click on the “Restore Default Settings” button.
6. Once default settings restored, disconnect the RJ45 Ethernet cable and restart

the extender.

PC2TV application does not work when connected with RJ45 Ethernet cable.

Make sure to connect the RJ45 Ethernet cable before powering on the wireless

video extender.