Vermont Casting VM508K - Manual (Page 9)

9 50004825
VM508K / VM658K Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov-
ing the grill is recommended.
Attach left skirt assembly to the unit:
– Loosen one hex bolt from corner post. (Refer to Corner Post Detail)
– Place left skirt assembly on the top of the bottom panel,
– Secure left skirt assembly with two (2) #10-24 x 3/8” screws.
– Tighten hex bolt at the back of the unit.
Repeat these steps for right side.
Slide two (2) skirt corner assemblies into the front
skirt assembly. Slide above assembly into at-
tached left and right skirt assemblies. Secure
all skirt assembly parts with three (3) #10-24 x
3/8” screws.
Step 9: Attach Skirt
Parts Required:
(1) Skirt Left Assembly
(1) Skirt Right Assembly
(1) Skirt Front Assembly
(2) Skirt Corner Assemblies
(7) #10-24 x 3/8” Screws (50004268)
(4) Adjustable Leveling Glide
Figures 8 & 9
Screw-in two (2) adjustable leveling glides into
hex threaded insert provided in front skirt assem-
bly.
Screw-in one (1) adjustable leveling glide into
hex threaded insert provided in left and right skirt
assemblies.
����
��������������
����
Leveling Glide
Skirt Left Assembly
Skirt Right Assembly
Skirt Front Assembly
B148
Figure 8
Inverted View
����
������������
����
Skirt Left
Assembly
Skirt Front Assembly
Skirt Corner Assembly
Skirt Right
Assembly
B149
Figure 9
#10-24 x
3/8” Screw
(50004268)
Corner Post Detail
Loosen Outer
Bolt at Back Side