Vermont Casting VM508K - Manual (Page 10)

10 50004825
VM508K / VM658K Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or
moving the grill is recommended.
Step 10: Attach Side Panels
Parts Required:
(2) Side Panels
(8) #10-24 x 3/8” Screws (50004268)
NOTE: Remove protective layer from side panels.
Figure 10
Place side panel, with cutout at bottom, against two
(2) corner posts.
Secure side panel using four (4) screws.
Repeat for opposite side.
Make sure the two (2) openings (cut-outs) are at the
bottom.
Step 11:
Attach Grease Catching Components
Parts Required:
(1) Grease Cup
(1) Grease Tray
Figure 11
Place grease cup into provided grease
cup holder.
Place grease tray into provided channels
and slide above grease cup until grease
tray locks into grooves inside left and right
brace.
�����
������������������
����
#10-24 x 3/8”
Screws
(50004268)
Side Panel
B150
Figure 10
����
�����������������
����
Grease Tray
Grease Cup
B151
Figure 11