Vermont Casting VM508K - Manual (Page 14)

14 50004825
VM508K / VM658K Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or
moving the grill is recommended.
Step 16: Attach Right Shelf Assembly to Grill
Parts Required:
Right Shelf Assembly
(1) Right Shelf Assy. (Step 5)
(4) 1/4-20 x 1¹⁄₂” Screws (50001383)
(2) #10-24 x 1/2” Screws (50000337)
Figures 15 & 16
Loosely screw in (4-5 turns) four (4) 1/4-20 x 1¹⁄₂” screws to the side of the grill.
NOTE: Ensure the side burner ignitor wire is not pinched as the shelf assembly is
installed into the unit.
Place right shelf assembly onto screws.
Secure (tighten) four (4) screws to the grill.
Secure condiment tray to the console with two (2) #10-24 x 1/2” screws.
Tighten two (2) remaining screws. (from Steps 14 and 15)
From inside grill, attach 10-24 x 1/2” screw to the right shelf
assy.
����
��������������
����
Figure 15
1/4-20 x 1¹⁄₂”
Screws
(50001383) #10-24 x 1/2”
Screws
(50000337)
B161
����
������������
����
#10-24 x 1/2” Screw
(50000337)
B180
Figure 16