Vermont Casting VM508K - Manual (Page 5)

5 50004825
VM508K / VM658K Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or mov-
ing the grill is recommended.
Step 2: Attach Casters to Bottom Panel
Step 3: Attach Four Metal Corner Posts to the Bottom Panel
Parts Required:
(4) Corner Posts
(16) 1/4-20 x 5/8” Bolts (50000181)
NOTE: Remove protective layer from
corner posts.
Figure 2
Loosely attach each corner post to the
corner of the bottom panel using four (4)
bolts each.
NOTE: Do not tighten all bolts at this
point.
Parts Required:
(1) Bottom Panel
(2) Front Casters
(2) Rear Casters (w/Brake)
(16) 1/4-20 Nuts (50001176)
Figure 1
Use top layer cardboard to protect floor and
parts from being scratched. Attach two (2) rear
casters (w/brake) to the back of the bottom
panel. (Fig. 5) Use four (4) nuts to secure each
caster to the bottom panel.
Attach two (2) front casters using four (4) nuts
to secure each caster to the bottom panel. Use
a 7/16” wrench or ratchet to tighten all nuts.
B142
����
��������������
����
Front Caster
Rear Casters
w/Brake
1/4-20 Nuts
(50001176)
B141
Figure 1
Flange Down
����
�������������������
����
Corner Post
1/4-20 x 5/8” Bolts
(50000181)
Figure 2
Flange Down