Sonics 1098 Press - Manual (Page 12)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
I N S T R U C T I O N M A N U A L • M O D E L 1 0 9 8
11
O P E R A T I N G P R O C E D U R E S
CONTROL PANEL
Located above the converter housing on the 1098 press are the following
controls:
1. Black PRESSURE REGULATOR with corresponding gauge that allows
regulation of the (air) pressure with which the horn contacts the part(s). Pull
the knob to make adjustments, and then push in to lock setting when
desired pressure is displayed on the gauge. Once pulled, turning the knob
clockwise increases pressure, and turning it counterclockwise decreases
pressure.
2. HEAD DOWN KEY SWITCH which when turned clockwise allows the
head to move down under gauge pressure. (This action does not cause
ultrasonics to be activated.)
❶
❷
Go To Top Of Document