Sonics VC750 (Serial No. "Y through "AB")" - Manual (Page 16)

13
REVIEW: The REVIEW function provides a “window” on the process by displaying
various
operating parameters without process interruption. Pressing the
ENTER/REVIEW key repeatedly during processing will consecutively display the
following information.
a) Selected amplitude:
e.g., Amplitude 40%
b) Set processing time and elapsed processing time:
e.g., Set 5:30:25 Time 0:57:03
c) Selected pulsing cycle, and actual pulsing cycle:
e.g., Pulse 2.5 1.0/1.5 .5
d) Amount of power in watts, and accumulated amount of energy in JOULES
delivered to the probe:
e.g., 20 watts 0000000 Joules*
e) Elapsed time since processing was initiated:
e.g., Elapsed time 1:27:33
*The number of Joules displayed is dependent on the watts being drawn and the
processing time.
NOTE
The amount of energy displayed will be only for
one run. Initiating a new run will reset the display
to zero.