Sonics VCX750 - Manual (Page 21)

16
CLEANING INSTRUCTIONS
The generator and converter may be cleaned using a solvent-free cleaning solution
(i.e. glass cleaner). Horns and probes should be cleaned using isopropyl alcohol.
Horns are made from titanium and can be autoclaved.
RETURN OF EQUIPMENT
It is suggested that if a unit is in need of repair, it should be sent back to the factory.
In order to receive prompt service; always contact the factory before returning any
equipment. Include date of purchase, model number and serial number. For
equipment not covered by the warranty, a purchase order should be forwarded to
avoid unnecessary delay. Care should be exercised to provide adequate packing to
insure against possible damage in shipment. The equipment should be sent to the
“Service Department” with all transportation charges prepaid and return of shipment
indicated.
Please obtain a
Return Authorization Number (RA#) prior to returning the instrument.
SAFETY CERTIFICATION FORM*
Federal law prohibits the transfer of equipment or products contaminated with
radiological, biological or chemical waste residue. Sonics requires that each customer
certify one of the statements on page 19. Prior to returning any equipment, please
make a copy of the form on page 19, fill in the form and send it back with the
equipment being returned.
*This form must accompany any equipment that is being returned for repair.