Solvline Eddy Serial Ver 2.1.0.3 - Manual (Page 59)

Chapter7. Appendix
59
def wifi key
[wep key string]
None Register key to use when Encryption is WEB.
def wifi password
[wpa password]
None Register password to use when Encryption is TKIP.
def wifi line
[dhcp, static ip]
DHCP Select acquiring way of IP in wireless network
def wifi ip
[IP address]
192.168.1.72 Register IP address when acquiring way of IP is Static IP.
def wifi gateway
[router Address]
192.168.1.1 Register GW address when acquiring way of IP is Static IP.
def wifi mask
[Mask Address]
255.255.255.0
Register Mask address when acquiring way of IP is Static
IP.
def wifi dns
[DNS Address]
168.126.63.1 Register DNS server address.
6.5 Serial Commands
You can set the communication and operation environment for the serial port. Chapter 5 describes each option in
detail. Only a summary of each option is presented here.
Commands Default Descriptions
def port 1 protocol
[disable / com/
tcp_server/tcp_client/
tcp_broadcast /
tcp_multiplex/
udp_server/udp_client]
com Select the operation protocol, which the serial port would use.
def port 1 socket
4001
Set the socket number for the port. TCP Server, TCP
Broadcase, TCP Multiplex, and UDP server operation modes
make use of this port for awaiting network socket connections.
def port 1 name Port 1 Port alias name for convenience. 16 Characters at maximum
def port 1 speed
[150/300/600/1200/2400/480
0/9600/19200/38400/57600/
115200/230400/460800
/921600]
9600bps Set communication speed.
def port 1 data
[5 / 6 / 7 / 8]
8 Set the number of bits in each character size.
Def po 1 interface
[rs422, rs485e, rs485ne]
RS422
Configure interface of serial 3,4 port on Eddy-S4M
(In Eddy-DK, this can be selected by Dip Switch on Eddy-DK
board so that this category cannot be selected. )
def port 1 stop [1 / 2] 1 Set the number of stop bits.
def port 1 parity
[none/odd/even]
none Set parity bit check scheme.