Serial settings, 4 serial settings – Solvline Eddy Serial Ver 2.1.0.3 User Manual
Page 38
Chapter7. Appendix
38
Password)
default ID is eddy and default password is 99999999
if you want to used this ,you should register your own in
Telnet Service
Enable
Enable or disable Telnet service.
If disabled, you cannot connect to Eddy via Telnet.
FTP Service
Enable
Enable or disable FTP service.
If disabled, you cannot connect to Eddy via FTP.
Web Service
Enable
Enable or disable Web service.
If disabled, you cannot connect to Eddy via Web.
SSH Service
Disable
Enable or disable Secure Shell service.
LemonIDE
Target Agent
Disable
Enable or disable remote debugging function used by Eddy
development environment, LemonIDE.
For more information, please refer to LemonIDE user manual in
the SDK CD included in Eddy-DK package.
5.4 Serial Settings
You can set the communication and operation environment for the serial port. After changing values, you need to
click ‘Submit’ button. Then you will see the same page with modified values. Please note that you have to
‘Save & Reboot’ in order to see these changes in effect. Changes will be discarded if you do not save current
settings.