Multi-4jall+/pci va2, Product specifications – Solvline PCI User Manual
Page 95

95
Multi-4JALL+/PCI VA2
Multi-4JALL+/PCI VA2
Multi-4JALL/PCI VA2 board is a model that supports PCI Local Bus Spec 2.3. It is designed to
automatically set I/O address and IRQ number when ROM bios or the operating system starts.
Unlike former products, Multi-4JALL+/PCI VA2 uses core for PCI Local Bus Spec 2.3 designed
by SystemBase and can be used on PCI 5V and PCI 3.3V bus system. Multi-4 JALL+/PCI VA2
not only supports maximum communication speed of 921.6Kbps but also provides advanced
ability to automatically control IO signals when it is used with driver provided by SystemBase. It
is a low price model equipped with RJ45 connector without external port box and can set
different line interfaces RS232/RS422/RS485 to each port. Also, LED is attached to RJ45
connector to show the current status of signal lines. Furthermore, it is equipped with surge
protector to protect internal systems from outer shock. Unlike former products, all information
about the board is contained within the board itself so the users can easily know information
such as number of ports currently installed, maximum communication speed, kind of
communication controller and etc.
- Product Specifications
Communication Speed
Maximum 921.6K BPS
BUS Interface
PCI Local Bus Spec 2.3
Circuit Interface
RS232/RS422/RS485
Communication Controller
16C554
Connector
RJ45
I/O Address
Automatic Configuration
IRQ Number
Automatic Configuration
Circuit Protection
Surge Protector Attached
Supported OS
Windows 98/2000/NT/XP/2003/Vista/2008/7, SCO UNIX, Linux
Manufacturer
SystemBase Co., Ltd.