Solvline PCI - Manual (Page 142)

142
Multi-32/LPCI VA1
Multi-32/LPCI VA1
Multi-32/LPCI VA1 is a model that supports PCI Local Bus Spec 2.3, which is designed to set up
I/O address and IRQ number automatically upon starting ROM BIOS and Operating System
without DIP switch to board. In the Multi-32/LPCI VA1, 32 ports only occupy 64 bytes of small
I/O space and there is no limitation of number to be installed as long as slots are available,
which solves a problem of Multi-32/PCI VA1 as it was limited to install maximum 4 units. It
doesn’t have any conflicts between I/O address and Interrupt, which has been a frequent
problem in products ISA. Also, the driver identifies the number of each port box and interface
type automatically; thus easily installation is available. In addition, it is also designed to protect
the system safely from transient-voltage by attaching the surge protector on the TX, RX line.
- Product Specifications
Communication Speed Maximum 921.6K BPS
BUS Interface PCI Local Bus Spec 2.3
Circuit Interface RS232/RS422/RS485
Communication Controller 16C554
Connector DB25 (Female)
I/O Address Automatic Configuration
IRQ Number Automatic Configuration
Circuit Protection 15kV Surge Protector Attached
Supported OS Windows 98/2000/NT/XP/2003/Vista/2008/7, SCO UNIX, Linux
Manufacturer SystemBase Co., Ltd.