Multi-4j/pci va1, Product specifications – Solvline PCI User Manual
Page 85

85
Multi-4J/PCI VA1
Multi-4J/PCI VA1
Multi-4J/PCI VA1 board is a model that supports PCI Local Bus Spec 2.3. It is designed to
automatically set I/O address and IRQ number when ROM bios or the operating system starts.
Unlike former products, Multi-4J/PCI VA1 uses core for PCI Local Bus Spec 2.3 designed by
SystemBase. Multi-4J/PCI VA1 not only supports maximum communication speed of 921.6Kbps
but also provides advanced ability to automatically control IO signals when it is used with driver
provided by SystemBase. It is a model equipped with RJ45 connector without external port box
and it is possible to supply power through this RJ45 to outside. Also, LED is attached to RJ45
connector to show the current status of signal lines. Furthermore, it is equipped with surge
protector to protect internal systems from outer shock. Unlike former products, all information
about the board is contained within the board itself so the users can easily know information
such as number of ports currently installed, maximum communication speed, kind of
communication controller and etc.
- Product Specifications
Communication Speed
Maximum 921.6K BPS
BUS Interface
PCI Local Bus Spec 2.3
Circuit Interface
RS232/RS422/RS485
Communication Controller
16C554
Connector
RJ45
I/O Address
Automatic Configuration
IRQ Number
Automatic Configuration
Circuit Protection
Surge Protector Attached
Supported OS
Windows 98/2000/NT/XP/2003/Vista/2008/7, SCO UNIX, Linux
Manufacturer
SystemBase Co., Ltd.