Multi-4j/pci va2, Product specifications – Solvline PCI User Manual
Page 89

89
Multi-4J/PCI VA2
Multi-4J/PCI VA2
Multi-4J/PCI VA2 board is a model that supports PCI Local Bus Spec 2.3. It is designed to
automatically set I/O address and IRQ number when ROM bios or the operating system starts.
Unlike former products, Multi-4J/PCI VA2 uses core for PCI Local Bus Spec 2.3 designed by
SystemBase and can be used on PCI 3.3V bus system. Multi-4J/PCI VA2 not only supports
maximum communication speed of 921.6Kbps but also provides advanced ability to
automatically control IO signals when it is used with driver provided by SystemBase. It is a
model equipped with RJ45 connector without external port box and it is possible to supply
power through this RJ45 to outside. Also, LED is attached to RJ45 connector to show the
current status of signal lines. Furthermore, it is equipped with surge protector to protect internal
systems from outer shock. Unlike former products, all information about the board is contained
within the board itself so the users can easily know information such as number of ports
currently installed, maximum communication speed, kind of communication controller and etc.
- Product Specifications
Communication Speed
Maximum 921.6K BPS
BUS Interface
PCI Local Bus Spec 2.3
Circuit Interface
RS232/RS422/RS485
Communication Controller
16C554
Connector
RJ45
I/O Address
Automatic Configuration
IRQ Number
Automatic Configuration
Circuit Protection
Surge Protector Attached
Supported OS
Windows 98/2000/NT/XP/2003/Vista/2008/7, SCO UNIX, Linux
Manufacturer
SystemBase Co., Ltd.