Solvline Eddy- ZB v1.0 - Manual (Page 13)

Eddy-ZB User Guide
D. Commands for ZigBee network
The followings are the commands to set ZigBee network.
AT
Command Name Description Value
Range Default
Value
ATMO Mode Able to set the device as:
Coordinator, Router, or End Device
Example :
atmo02 (Set the device
as an end device)
00 Coordinator
01 Router
02 End 0x02
ATCH Channel Select the channel (EX: atch0b)
Example :
atch0b (Set the device to
channel B)
0B – 1A 0C(12d)
ATPI Pan ID Select the Pan ID
Example :
atpi0001 (Set the PAN ID
to 1)
0 – 0xFFFF 0
ATDA Destination
node id The node ID of the target
Example
: atda01 (Set the
destination ID to 1)
0 – 0xFF 0
ATSA Source
node id The node ID of the source
Example :
atsa02 (Set the source ID
to 2)
0 – 0xFF 0
ATMA IEEE 64bit Displays IEEE 64bit address
Example :
atma
Read
only