Solvline Eddy- ZB v1.0 - Manual (Page 10)

Eddy-ZB User Guide
5. ZigBee Network Configuration
If necessary, Eddy-CPU/ZigBee v1.0 can be set and used as an end device, a coordinator, or a
router.
The ZigBee end device is located at the end of the ZigBee network which can only connect to
ZigBee coordinator or ZigBee router. Existing only one network PAN, the ZigBee coordinator
manages each devices in the network when ZigBee network is first formed. Expansion of the
network is done by ZigBee router. Without ZigBee coordinator, the network cannot be configured.
A. 1:1 connection between an End Device and a Coordinator
Coordinator End Device
To use 1:1 connection with Eddy-ZB v1.0, one of each end device and coordinator is required.
Each device can specify a unique source ID. When the source ID of a device trying to send a
data is set to the destination ID, the data can be transmitted. PAN ID and the channel from the
coordinator should be applied to the end device to form a network.
B. Star network topology with one coordinator and several end devices
End Device End Device
Coordinator
End Device
End Device
To use one coordinator with several end devices, all the end devices should be set with the
PAN ID and channel of the coordinator. Additionally, to communicate among end devices, each
devices should have a unique ID as a source ID and the ID from the device trying to send the
data should be set in the destination ID.