beautypg.com

Sentry – Slant/Fin S-150 User Manual

Page 25

background image

25

Sentry

(a) Seal any unused openings in the common venting system.
(b) Visually inspect the venting system for proper size and hor-

izontal pitch and determine there is no blockage or restric-
tion, leakage, corrosion and other deficiencies which could
cause an unsafe condition.

(c) Insofar as is practical, close all building doors and windows

and all doors between the space in which the appliances
remaining connected to the common venting system are
located and other spaces of the building. Turn on clothes
dryer and any appliance not connected to the common vent-
ing system. Turn on any exhaust fans, such as range hoods
and bathroom exhausts, so they will operate at maximum
speed. DO NOT operate a summer exhaust fan. Close fire-
place dampers.

(d) Place in operation the appliance being inspected. Follow the

lighting instructions. Adjust thermostat so appliance will
operate continuously.

(e) Test for spillage at the draft hood relief opening after 5 min-

utes of main burner operation. Use the flame of a match or
candle, or smoke from a cigarette, cigar or pipe.

(f) After it has been determined that each appliance remaining

connected to the common venting system properly vents
when tested as outlined above, return doors, windows,
exhaust fans, fireplace dampers and any other gas-burning
appliance to their previous conditions of use.

(g) Any improper operation of the common venting system

should be corrected so the installation conforms with the
National Fuel Gas Code, ANSI Z223.1-latest edition. When
resizing any portion of the common venting system, the
common venting system should be resized to approach the
minimum size as determined using the appropriate tables in
Appendix G in the National Fuel Gas Code, ANSI Z223.1-
latest edition.

APPENDIX A

Removal of Existing Boiler from Common Vent System

"At the time of removal of an existing boiler, the following steps shall be followed with each appliance remaining connected to
the common venting system placed in operation, while the other appliances remaining connected to the common venting system
are not in operation."

This manual is related to the following products: