beautypg.com

SilentKnight VisorAlarm Manager User Manual

Page 8

background image

VISOR-ALARM Quick Setup Guide

8

Doc. DM381-I

Rev. 1.0

Fig. 10.

The VisorALARM has already been configured. What we need to know is the
VisorALARM IP address and carry out the actions indicated in the previous
point.

3.4.

The next step is to check the IP connectivity between the PC and the
VisorALARM. Execute the PING command from the PC to the VisorALARM.
The following window displays the correct operating situation for the PING. This
indicates there is IP connectivity from the PC to the VisorALARM.

Fig. 11.

The following window is shown should the PING command fail. Consequently, it
will be necessary to recheck the IP configuration for both the VisorALARM and
the PC.