SilentKnight VisorAlarm Manager - Manual (Page 7)

VISOR-ALARM Quick Setup Guide
7
Doc. DM381-I
Rev. 1.0
2. With the right hand mouse button, select Explorer. Select ‘Local
Area Connection’. With the right hand button, select ‘Properties’.
3. The configuration screen that appears is as follows:
Fig. 9.
4. Using the mouse double click on ‘Internet Protocol (TCP/IP)’ and a
window appears where you can enter the IP address, mask and link
port
5. To save the configuration changes, select the ‘OK’ button on each of
the windows.
6. The changes are dynamic; consequently you do not need to reboot the
PC.