Extractor removal – SIG SAUER SIGM400 Rifle User Manual
Page 57
when it counts
™
www.sigsauer.com
57
7.2. Extractor Removal
1. Apply slight pressure to the rear of the extractor with the thumb.
2. Using a punch, or the tip of the firing pin, push out the extractor pin. from either side.
3. Remove the extractor from the bolt.
FIG 29 BOLT WITH EXTRACTOR REMOVED
NOTE: Only separate the extractor spring from the extractor when replacement is necessary
Retaining Pin
Extractor
11SIG455_M400MiniManual.indd 57
8/2/11 3:58 PM
See also other documents in the category SIG SAUER Sports and recreation:
- AIRSOFT PISTOL (Handling & Safety) (20 pages)
- P239 (88 pages)
- P238 (68 pages)
- P226 X-Five (21 pages)
- P250 (68 pages)
- P290 (68 pages)
- P320 (68 pages)
- P556 (60 pages)
- SP2022/SP2022М (64 pages)
- SP2340 (24 pages)
- MOSQUITO (28 pages)
- P232 (48 pages)
- 1911 (15 pages)
- 1911 Ultra Addendum (2 pages)
- 1911 .22LR (64 pages)
- P522 Pistol (31 pages)
- P210 (20 pages)
- BLASER R93 (24 pages)
- BLASER K95 (24 pages)
- BLASER Tac2 (36 pages)
- SSG 3000 (72 pages)
- SIG516 Rifle (96 pages)
- SIG716 Rifle (96 pages)
- SIG522 Rifle (31 pages)
- SIG 551-A1 Rifle (100 pages)
- SIG556 (104 pages)
- SIG556xi (84 pages)
- SIG556 Grip-Light Operating (4 pages)
- SIG50 (60 pages)
- SHR 970 (20 pages)
- SWISS ARMS SG552 (33 pages)
- MAGPUL CTR Stock (1 page)
- SIG522 and SIG556 Charging handle (2 pages)
- SIG522 Sight Kit Installation (2 pages)
- SIG522 Barrel Removal and Replacement (1 page)
- SIG522 Recoil Spring Upgrade (2 pages)