SIG SAUER BLASER K95 - Manual (Page 21)

21
5.2 Removing scope
- Grip rifle at the fore-end with your left
hand and support it on your thigh.
- Flip both covers of the locking levers
open.
- Fist swivel the rear locking lever all the
way to the front/top with your thumb,
until it reaches the stop.
- Grip the centre tube of the scope with
your right hand and keep it in this
position.
- Now swivel the front locking lever all
the way to the front/top with your
thumb, until it reaches the stop.
- Tilt scope to the right and remove it.
1.
Locking lever pushed forwards (open)
for mounting or removing of scope.
Cover open.
5. Mounting the scope
2.
Locking lever pulled backwards (tighten-
e d ) . This position is reached, when the
front edge of the locking lever (A) stands
at a 90° angle to the barrel axis. 3.
Locking lever pulled backwards (tighten-
e d ) . Cover closed. When the locking
lever is in its correct position, the line on
the cover is parallel to the barrel axis (B).
A
B
K95 English 2001 6/8/01 2:40 PM Page 21