SIG SAUER P938P - Manual (Page 26)

www.sigsauer.com 26
Step 2
5.2 firing the Pistol
aim the pistol at a safe target
1. Place thumb safety off (safety doWn).
2. Place finger on the trigger and pull back to discharge.
3. Keep pistol aimed at the target and continue to fire as required or until the
pistol is empty.
4. remove the magazine, unload and clear the pistol (see section 6.0 “unloading
the Pistol”). if the pistol is fired until the magazine is empty, the slide will remain
locked to the rear. if firing is to continue, reload the pistol (see section 4.4
“reloading during Shooting”).
Step 1