Shellab SCO10A-2 - Manual (Page 3)

3
RECEIVING AND INSPECTION
Your satisfaction and safety require a complete understanding of this unit. Read the instructions
thoroughly and be sure all operators are given adequate training before attempting to put the
unit in use. NOTE: This equipment must be used only for its intended application; any
alterations or modifications will void your warranty.
1.1 Inspection: The carrier, when accepting shipment, also accepts responsibility for safe delivery and
is liable for loss or damage. On delivery, inspect for visible exterior damage, note and describe on
the freight bill any damage found, and enter your claim on the form supplied by the carrier.
1.2 Inspect for concealed loss or damage on the unit itself, both interior and exterior. If any, the carrier
will arrange for official inspection to substantiate your claim.
1.3 Return Shipment: Save the shipping crate until you are sure all is well. Never ship anything back
inside the chamber. If for any reason you must return the unit, contact your service representative
for authorization and supply the data plate information. Please see the manual cover for
information on where to contact Customer Service.
1.4 Accessories: Verify that your accessory kit is complete. The SCO5A (5215) and SCO5A-2 and
(5215-2) are equipped with 3 shelves, supply hose kit, 4 leveling feet and pan. The SCO10A
(5230) and SCO10A-2 (5230-2) are equipped with 6 shelves, supply hose kit, 4 leveling feet and 2
pans. Check all packaging materials before discarding
.
Section
1