Shellab BACTRON600 - Manual (Page 7)

7 | P a g e
RECEIVING YOUR BACTRON
Before leaving our factory, all BACTRONs are packaged in high-quality shipping materials to
provide protection from transportation-related damage. When the unit departs the factory, safe
delivery becomes the responsibility of the carrier. Damage sustained during transit is not covered
by the
BACTRON’s warranty.
This makes it important that you inspect your BACTRON for concealed loss or damage to its
interior and exterior when receiving it. If you find any damage to the workstation,
follow the carrier’s
procedure for claiming damage or loss.
I
NSPECTING THE
S
HIPMENT
Carefully inspect the shipping carton for damage. Report any damage to the carrier service that
delivered the BACTRON. If the carton is not damaged, open the carton and remove the contents.
The unit should come with an Installation and Operation Manual, warranty card, and a Certificate of
Compliance
.
Verify that the correct number of components are included with the unit:
Anaerobic Indicator
Strips (5 packets)
Arm Port Door
Left and Right
PN 9900699 / PN 9900698
BACTRON300 / 900
Shelf Spacers
BACTRON600
Arm Port Door Stands
Catalyst Cartridges
(2)
Foot Pedal Unit Gas Regulator, AMG
LED Lamp Unit Leveling Feet
(4)
BACTRON300
Petrie Dish Rack
7 (2 x 11)
BACTRON600
Petrie Dish Rack
10 (2 x 13)
BACTRON900
Petrie Dish Racks
7 (2 x 11) 10 (2 x 13)
Power Cord 5-15
NEMA
Vacuum Pump Sleeve Cuff
Assemblies
2 (Size 8 Medium)