Shellab BACTRON600 - Manual (Page 13)

13 | P a g e
INSTALLATION (CONTINUED)
L
IFTING AND
H
ANDLING
The BACTRON is heavy, and care should be taken to use appropriate lifting devices that are
sufficiently rated for these loads. Follow these guidelines when lifting and handling the BACTRON
workstation:
 Lift the BACTRON only from its bottom surface.
 Doors, handles, and knobs are not adequate for lifting or stabilization.
 Restrain the BACTRON completely while lifting or transporting so it cannot tip.
 Remove all moving parts, such as shelf spacers and trays, and secure all doors in the
closed position during transfer to prevent shifting and damage.
Note: To prevent damage when moving the BACTRON, turn each of the four leveling feet
completely clockwise.
L EVELING
The BACTRON must be level and stable for safe operation. Each BACTRON ships with four
leveling feet. Insert one leveling foot into each of the four holes in the bottom corners of the
workstation. Adjust the foot at each corner until the workstation stands level and solid without
rocking. To raise a foot, turn it in a counterclockwise direction; to lower a foot, turn it in a clockwise
direction.