Seville Classics UHD20238F - Manual (Page 9)

Step 12.
Step 13. Place Drawer Mat (#13) into Drawers
`
Step 14. Install Magnet (#23)
Place the Drawer Mat (#13) inside the drawer, on
top of the base panel as shown in the diagram.
Note: If there are gaps between the drawer
panels or the frame is not square, please pull out
the drawer and loosen the screws to make
adjustments.
Place (#23) Magnet onto the top and bottom of
front frame (#6) facing the front, use 4pcs Screw
A (#14) to tighten.
UltraHD Rolling Cabinet (Model No. 20238F)
(pg 8 of 10)
Install Drawer (#12) into cabinet
1). Pull out both slides for drawer. Hook the
drawer between both slides, make sure the slide
hooks are completely inserted into the square
holes on the drawer side panels.
2). Line up the screw holes, and using 4pcs Screw
B (#15) to tighten the drawer.
#12
#13
#15
#14
#23