Seville Classics UHD20238F User Manual

Page 10

Step 15. Install Middle Shelf (#8).

Step 16. Install the Left and Right Doors (#18 and #19)

MAINTENENCE

Casters: use high quality bearing grease once a year.

Ball-Bearing Sliders:

Lock:

Lubricate with lock oil once a year.

Stainless Steel Top, Drawer and Door Fronts:

UltraHD Rolling Cabinet (Model No. 20238F)

(pg 9 of 10)

1). Decide the height for the Middle Shelf (#8). Place 4pcs of
(#34) Hook into the hook slot where each corner of shelf
should be placed. Make sure the hooks supporting each
shelf are at same height.

Note: The middle shelf needs a hook at each corner to
support it.

2). Place (#8) Middle Shelf into cabinet and push down onto
(#34) Hooks.

1). Attach the Left Door (#18) to the unit using 4pcs Screws
B (#15) to tighten.

Note: The screw holes on the door hinge have tolerance,
enabling the door to be adjusted and centered in the frame.

2). Install the Right Door (#19) the same way.

Lubricate the slider twice a year
with grease or equivalent.

These parts have a premium quality fingerprint resistant finish.
Do not use traditional stainless steel cleaners on this unit.
Lightly wipe off once a month with clean warm water and a soft cloth
(preferably a micro fiber cloth or T-shirt). This is the safest formula to prevent
new stains from appearing over time and manage unwanted finger prints or
grease marks. Remeber to always wipe in the direction of the surface grain
(NEVER ACROSS) and always use a lint-free cloth. Once the sruface is clean,
thoroughly wipe dry with a soft absorbent cloth.

#34

#18

#15

#19