Seville Classics UHD20238F User Manual
Page 8
Step 9. Install Drawer Base Panel and Drawer Front
(#12-4 and #12-1 ).
Step 10. Install Drawer Side Panels (#12-2 and #12-3)
Step 11. Install Drawer Back Panels (#12-5)
WARNING:
Attach Drawer Side Panels (#12-2 and #12-3) to the
back of Drawer Front (#12-1). Make sure the Drawer
Side Panels (#12-2 and #12-3) are placed all the way
into the slot, making contact with the inner wall of the
front panel. Line up the screw holes and use 10pcs
Screw B (#15) to tighten them.
Attach the Drawer Back Panel (#12-5) to the rest of
the assembled drawer. Use 7pcs Screw B (#15) to
tighten.
Pull out slides before placing the drawer into the
cabinet.
UltraHD Rolling Cabinet (Model No. 20238F)
(pg 7 of 10)
Fit and attach Drawer Base Panel (#12-4) into the back
slot of stainless steel Drawer Front (#12-1), use 3pcs
Screw B (#15) to tighten.
Note: Do not fully tighten any one screw until all
screws are partially screwed in.
#12-1
#12-4
#15
#15
#12-2
#12-3
#15
#12-5