Seville Classics UHD20246B - Manual (Page 8)

Step 14. Place (#45) Power Strip.
Step 15.
UltraHD Wood Top
Restore Shallow Scratches or Chips
Applying a Polyurethane Coating
Please follow the manufacturer's instruction on the product for application.
If the wood top becomes scratched and chipped over time or during assembly, a Polyurethane finish can be applied to help
restore the wood's natural texture, as well as protect the surface from future damage.
ASSEMBLY INSTRUCTIONS
(pg 7 of 8)
*NOTE: We recommend TWO people to assemble the workbench.
Insert and screw (#51) Stud Screw J to (#3-C)
Bottom Pegboard Panel, then, hook (#45) Power
Strip on and make sure the power cord goes
through Rubber Grommet of (#3-C) Bottom
Pegboard Panel.
NOTE: You can position (#45) Power Strip on the
left or right side of the (#3-C) Bottom Pegboard
Panel.
Place (#100), (#101), (#102), (#103), #104),
(#105), (#106), (#107) Hooks to Pegboard as
you desire.
Although great care is taken to hand select consistent wood top color and grain for UltraHD products, there can and will be
natural variations in color and graining between finished products. These variations contribute to the beauty of using a natural
material as a workbench and are considered standard quality. Variations of color within these standards and minor scratches in
the clear coat finish will not be a reason for replacement. If the wood top is received with excessive damage or splitting, Seville
Classics will guarantee replacement of the wood top.
[!] CAUTION: Potential Shock or FireHazard. This unit is
not intended for use in wet or potentially wet locations,
such as showers, saunas, under or near fishtanks, sinks,
etc.