Seville Classics UHD20246B - Manual (Page 6)

Step 8.
Step 9.
Step 10.
ASSEMBLY INSTRUCTIONS
(pg 5 of 8)
*NOTE: We recommend TWO people to assemble the workbench.
Install (#20-3 & #20-4) Left & Right Small Drawer Side
Panels.
NOTE: Once assembled, you should have two small
Drawers.
Fit and attach the (#20-3 & #20-4) Left & Right Small
Drawer Side Panels to the (#20-1) Small Drawer Front Panel.
Make sure the (#20-3 & #20-4) Left & Right Small Drawer
Side Panels are placed in all the way making contact with
the rear of the (#20-1) Small Drawer Front Panel. Line up
the screw holes and use (#15) Screw B to tighten.
Install (#19-2) Drawer Base Panel.
From above, fit and attach (#19-2) Drawer Base Panel
between the (#20-3 & #20-4) Left & Right Small Drawer Side
Panels and into the back of the (#20-1) Drawer Front Panel.
Line up the screw holes and use (#15) Screw B to tighten.
NOTE: Do not fully tighten the screws. Once you adjust all
the parts in position, tighten all screws.
Install (#20-5) Small Drawer Back Panel.
Attach the (#20-5) Small Drawer Back Panel to the rest of
the assembled drawer. Line up the screw holes and use
(#15) Screws B to tighten.
Repeat Steps 8-10 to assemble another drawer.