Rv installation appendix – SeaLand 8700 Series MasterFlush Toilet Installation User Manual
Page 15
15
CoNVERSIoN TABLE
Wire – AWG to mm
2
Feet to Meters
AWG
14
12
10
Ft
10
15
20
30
50
mm
2
2 .5
4 .0
6 .0
M
3 .1
4 .6
6 .1
9 .2
15 .2
Wire size per length of run*
0-15 ft.
16-30 ft.
31-50 ft.
12 volts DC
#14
#12
#10
* Distance from circuit breaker to electronic control module.
WIRE SIzING CHART
When installing a Dometic macerator toilet in a recreation vehicle, please use the following wiring
information .
Warning – recreation vehicle applications
The following must be read and understood before installing, servicing and/or operating this product
on a recreation vehicle. Modification of this product may result in property damage.
Dometic recommends that a qualified RV technician or electrician install or service this product with
regard to all applicable codes and regulations. Equipment damage, personal injury or death could result
from improper installation. DOMETIC ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR DAMAGE TO
EQUIPMENT, OR PERSONAL INJURY OR DEATH THAT MAY RESULT FROM IMPROPER INSTALLA-
TION, SERVICE OR OPERATION OF THIS PRODUCT.
Installation notes
• Each toilet must have its own circuit breaker or fuse.
• Wire sizes must be appropriate for the installation. All other installation factors must be in accordance
with ISO electrical standards.
• Always use stranded copper wire (preferably tinned).
• Always use crimp-type wire connections. Do not use wire nuts (they corrode).
Warning!
Hazard of Shock or Fire: Always use recommended fuse, circuit breaker and wire size .
Failure to do so can cause the loss of property and life .
Dometic 8700 Series MasterFlush Toilet
RV Installation Appendix
Wiring / Electronic Control Module Connections