SeaLand 140 VacuFlush Series Toilet - Manual (Page 6)

6
MAINTENANCE
Maintenance intervals and normal parts replacement vary widely depending on numerous factors such as:
type of vessel, frequency of system use, quality of flushing water, etc. The chart below is intended strictly as a
general guideline. Owner discretion and consideration of actual usage must be the first basis for determining
proper maintenance levels.
*See Base Assembly - Page 8.
VACUUM TESTER
Dometic has developed a simple tool to assist in identifying
the location of vacuum leaks. The vacuum tester consists of a
vacuum gauge and a cone-shaped plug. Inserting the plug in the
inlet of the vacuum tank or generator isolates the toilet from the
system. In this way a troublesome leak can easily be located
in either system.
Order only the Vacuum Tester (part number 318530002) or
as part of the complete system VacuFlush ® maintenance kit
(part number 385310228).
Vacuum Tester
SERVICE TIP
Checking for leaks behind or under toilets or other appliances can make it difficult to locate the source. Dripping
water at room temperature makes it difficult to feel wetness. Taking four or five sheets of toilet tissue and wiping
all seams and waterline connections offers a simple means of locating the general area of the leakage. Start at
the top of the unit since gravity will cause a leak to run downward. When the tissue comes in contact with the
leaking water, it will immediately change texture.
Maintenance Procedure
Follow cleaning procedures above.
Tighten all clamps, including base clamp ring.*
Check all wire connections.
Check & tighten water valve mounting screws.
Clean filter screen in water valve.
Check vacuum pump and in-line duckbill valves.
Check toilet seals.
Check vacuum breaker.
Check water valve.
Approximate Maintenance Level
Monthly
Annually
Annually
Annually
Annually
2-3 years or as needed
3-5 years or as needed
3-5 years or as needed
3-5 years or as needed