Sceptre E248W-1920 - Manual (Page 15)

Page14 SCEPTRE E24
Connecting the LED Monitor
If You have DVI Connection on Your V
ideo Card…
1. Make sure the power of E24 LED MONITOR is turned off.
2. Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other
end of the cable to your E24 LED MONITOR.
3. Turn on the power of both the E24 LED MONITOR and the PC.
Please Note:

Some video cards may have their DVI connection turned off by default. If you do
not get video, please consult your video card’s technical support.
 The PC’s clearest picture is produced under 1920 x1080 at 60 Hz.