Sceptre E248W-1920 - Manual (Page 11)

Page10 SCEPTRE E24
Setting Up Your Monitor
The following are general short steps to setup and use the monitor with your PC
under the Windows 7 operating system.
1. After you have installed the base, connect your VGA or DVI cord to both the
monitor and PC and turn on the PC and the monitor.
2.
Under Windows, use your mouse to right click on the wallpaper and select the
RESOLUTION option.
3.
Change your resolution to 1920x1080 and click on APPLY.
For Microsoft Windows 8
1.
After you have installed the base, connect your VGA or DVI cord to both the
monitor and PC and turn on the PC and the monitor.
2. Under Windows, use your mouse to select Desktop.
3.
Once you’re on the desktop, right-click on the wallpaper and select the
RESOLUTION option.
4.
Change your resolution to 1920x1080 and click on APPLY.