Adding phones with bat – Cisco 7921G User Manual
Page 5
3-5
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Chapter 3 Setting Up the Cisco Unified Wireless IP Phone 7921G
Before You Begin
Refer to Bulk Administration Tool User Guide for Cisco Unified CallManager for
detailed instructions about BAT and about TAPS.
Related Topics
•
Adding Phones with Auto-Registration, page 3-4
•
Adding Phones with Cisco Unified CallManager Administration, page 3-6
•
Adding Phones with BAT, page 3-5
Adding Phones with BAT
To add a group of phones to the Cisco Unified CallManager database, you can use
BAT. This plug-in application for Cisco Unified CallManager enables you to
perform batch operations, including registration, on multiple phones.
To add phones using BAT only (not in conjunction with TAPS), you first must
obtain the appropriate MAC address for each phone.
Determining the MAC Address of a Cisco Unified IP Phone
When adding phones to the Cisco Unified CallManager database using
Cisco Unified CallManager Administration or using BAT, you must enter the
media access control (MAC) address of the phone.
describes how to
determine the MAC address of the wireless IP phone.
For detailed instructions about using BAT, refer to Cisco Unified CallManager
Administration Guide and to Bulk Administration Tool Guide for Cisco
Unified CallManager.
Table 3-2
Determining the MAC Address of the Phone
Method
For More Information
Choose Settings > Model
Information > MAC Address and
look at the MAC Address field.
See
“Viewing Model Information”
section on page 7-10
Remove the battery and look on the
back of the phone.
See the